As standard, the brake is noise reduced providing reliable braking for applications where quiet operation is critical.
KEB noise reduced load brakes operate at less than 65dB at 1 meter.
KEB Load Brake’s mounting flange is integrated into the brake body to allow for internal and external mounting options.
Customers can choose the right flange for their installation – generic, KEB or SEW patterns, or shaft mount with torque arm.
The Load Brake is provided with a rubber dust protection ring that is IP44 rated. The rubber protection ring prevents dust and other small items from falling into the brake.
A 10-foot SOOW cable lead is provided with each Load Brake.
KEB Combistop brakes use a redundant spring design to provide power-off failsafe braking. The spring-set brake is electrically released.
Load Brakes are available in a range of static torque measurements up to 1500Nm.
A manual hand release allows the brake to be opened without electrical power.
If no hand release is required, the brake will be provided with release bolts.
A microswitch is used as a secondary check to verify the brake state.
Hub bores can be specified in metric or imperial units.
• DC Coil Voltage: 24, 105, 170, 205, 270 VDC Standard (Custom upon request)
• Duty: 100% on
• Insulation Class: F (H available as option)
• Approvals: CSA, CE
• Type: Spring-set, electrically released
• Torque Range: 250 – 1500Nm
• Environmental Rating: IP44