Advanced control for high speed motors

KEB SCL Control

Advanced control for high speed motors

One of KEB’s specialties is controlling high-speed motors used on turbo blowers and power generating systems.  High speed motors can operate in excess of 100,000 rpm and typically use air foil or magnetic bearings.  Obviously at these speeds, precise control is required in order to reduce vibration and motor heating.  Enter KEB.

This is the first of two parts on how KEB VFDs can be applied in high-speed applications. In this post we’ll talk about KEB’s unique technology and how it applies to operating high speed machinery.

The second post discusses some options to optimize performance with high speed motors.

KEB Control  – Advanced control technology for advanced technology motors

From high speed spindles and routers to blowers and compressors, KEB’s proven Variable Frequency Drive (VFD) and filter technology provides the control systems to make these applications a success.  One advantage with the KEB drive platform is that one drive can operate a variety of different motor types.

High speed motors, whether a surface mount permanent magnet (SMPM), interior permanent magnet (IPM) or induction motor, utilize advanced technology to provide a high power density and high efficiency solution to the application.

Such advanced motors incorporate advanced technology such as magnet bearings and air foil bearings. The VFD system to control these motors should also utilize advanced technology to provide the best performance and highest efficiency of the overall system. KEB drives and filters provide the advanced control technology needed to run these motors effectively and efficiently.

KEB Sensorless Closed Loop Software (SCL)  – Precise control without feedback

KEB’s SCL software provides precise speed and torque control of SMPM or IPM high-speed motors without requiring a feedback device. The high-frequency output required for the typical high-speed applications has the potential to cause adverse effects to the feedback signals, which can affect the control of the motor.

KEB SCL software eliminates this issue by utilizing a high-speed processor and direct measurement of the motor characteristics to build a precise model of the motor. The software uses the output current and back EMF(for PM motors) and compares these to the calculated model values and makes adjustments based on this information effectively closing the loop internally in the software.

KEB SCL Control

KEB’s proprietary SCL motor algorithms provides extremely precise torque and speed regulation.

 

KEB Drives  – High output frequency

In addition to the advanced software, KEB drives are available with hardware capable of switching frequencies up to 16khz, depending on the drive size. The higher switching frequency allows the current waveform to approach a sine wave which provides superior motor performance and higher system efficiency.

Output frequencies up to 1600hz are available. Depending on the motor type and control, motor output speeds of 100krpm have been achieved.

If you have any questions about how KEB drives can be used in high-speed applications contact us today and our applications engineers will be ready to help you out.

Interested in KEB’s automation technology? Contact a KEB engineer today to discuss your application.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Contact
  • This field is for validation purposes and should be left unchanged.